Audio-Technica ATM350UL Kondenzátorový nástrojový mikrofon

Features
Low-profile mic design for minimum visibility
Crisp, clear, well-balanced microphone response, even at high SPLs
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone
Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
Included violin mount with hook-and-loop fastener provides an additional mounting option

Specs
Element Fixed-charge Back Plate, Permanently Polarized Condenser
Polar Pattern Cardioid
Frequency Response 40 – 20,000 Hz
Low Frequency Roll-off 80 Hz, 12 dB/octave
Open Circuit Sensitivity –49 Db (3.5 Mv) Re 1v At 1 Pa
Impedance 200 Ohms
Maximum Input Sound Level 159 dB SPL, 1 Khz At 1% T.H.D.
Dynamic Range (Typical) 130 dB, 1 Khz At Max SPL
Signal-to-noise Ratio 65 dB, 1 Khz At 1 Pa
Phantom Power Requirements 11– 52V DC, 3.5 Ma Typical
Switch Flat, Roll-off
Weight (Microphone) 14.5 g (0.5 Oz)
Weight (Power Module) 90 g (3.2 Oz)
Dimensions (Microphone) 37.8 mm (1.49'') Long,
12.2 mm (0.48'') Maximum Body Diameter
Dimensions (Power Module) 92 mm (3.62") Long,
18.9 mm (0.74") Diameter
Output Connector (Power Module)Integral 3-pin XLRM-type
Cable 4.0 m (13.1') Long (Permanently Attached To Microphone), 3.2 mm (0.13") Diameter, 2-conductor Shielded Cable With Hirose Hr10-type Connector