- Vhodné pro: Gramofon
- Napětí: 4 mV
- Frekvenční rozsah: 10 Hz - 55 kHz
- Frekvenční odezva: 10 Hz - 55 kHz
Grado ME+ Hi-Fi přenoska
Grado ME+ je specializovaná mono přenoska určená pro posluchače vinylů s mono LP kolekcemi. Využívá eliptický diamantový hrot a vylepšený generátorový systém Grado pro tišší a soustředěnější přehrávání mono nahrávek. Navržena jako upgrade oproti staršímu modelu MC+, vrací život vintage mono lisům se sníženým povrchovým šumem a vylepšeným sledováním drážky.
- Eliptický diamantový hrot (.03 x .07) namontovaný v mosazném pouzdře pro přesné sledování mono drážky
- OTL chvějka — modifikovaná čtyřdílná konstrukce spárovaná s cívkami z bezkyslíkatého drátu pro čistší přenos signálu
- Výstup: 4 mV @ 3.54 cm/s vhodný pro standardní 47 kOhm MM phono vstupy
- Sledování: 1,5 g síla s 6 g hmotností snímače
Mono Phono Cartridge for Dedicated Mono LP Playback
The Grado Prestige ME+ is a moving-iron mono phono cartridge engineered for mono LP playback. Unlike a stereo cartridge on a mono record, a true mono design eliminates vertical tracking artifacts and dramatically reduces surface noise, clicks, and crackle. This model replaces the older MC+ with an upgraded generating system. It suits analog enthusiasts who collect vintage mono LPs, modern mono reissues, or archival classical and jazz pressings and want focused, low-noise playback.
What Sets the ME+ Apart
What sets this model apart is its modified four-piece OTL cantilever technology and oxygen-free wire in the coils. The stylus is a high-polished elliptical diamond mounted in a brass bushing, giving the cartridge a stable, low-mass coupling to the mono groove wall. These details translate into quieter playback, tighter channel focus, and improved tracking on worn or noisy mono pressings compared with using a stereo cartridge.
Key Technical Specifications
Built around a moving-iron generator with a 47 kOhm input load, the ME+ is a drop-in match for any MM phono stage. Its 4 mV output at 3.54 cm/sec gives enough headroom for typical home phono preamps without a step-up transformer. The 1.5 g tracking force and 6 g pickup weight keep it compatible with most standard tonearms.
- Output: 4 mV @ 3.54 cm/sec — comfortable level for standard MM phono inputs
- Frequency Response: 10–55,000 Hz — extended top-end for full mono groove retrieval
- Stylus: Elliptical diamond, .03 x .07, mounted in a brass bushing for stable mono tracing
- Tracking Force: 1.5 g — light, low-wear contact with vintage vinyl that helps preserve fragile mono grooves
- Pickup Weight: 6 g — fits standard tonearm/headshell mass ranges
- Input Load: 47 kOhm — direct compatibility with MM phono stages
Who the Grado ME+ Is For
The Grado ME+ is the right choice for analog listeners who own mono LPs and want a dedicated mono playback chain without moving to flagship-tier designs. It suits collectors of 1950s and 1960s jazz and classical mono pressings, fans of modern mono reissues, and anyone frustrated by the noise a stereo cartridge imposes on a true mono groove. At this tier, it sits well below specialist mono designs, making it a practical entry into serious mono playback.
Tvar
Doporučený přítlak
1,5 g
Frekvenční rozsah
Frekvenční odezva
10 Hz - 55 kHz
Impedance (Ohm)
475
Vnitřní Indukčnost
47 mH
Doporučený zatěžovací odpor
47 kOhm
Počet v balení (ks)
1
Napětí
Hmotnost
6 g
Země původu
USA
Dokumenty
Bezpečnostní pokyny
Příslušné bezpečnostní pokyny k výrobku nalezneš v návodu k použití.
