Vyber si zemi pro doručení zásilky

Nákupní košík

RockBoard RBO CAB F TMB 60 BK 60 cm MIDI kabel

Kód produktu: 1338165

RockBoard RBO CAB F TMB 60 BK 60 cm MIDI kabel

Kód produktu: 1338165

The RockBoard Flat Mini-TRS to MIDI Cable (Type B, 60 cm) is a space-saving adapter cable that links a 3.5 mm stereo TRS MIDI output to a standard 5-pin DIN MIDI input. With its flat rectangular conductor profile, it keeps pedalboard wiring low-profile and resistant to the twisting and kinks that break ordinary round cables over time. Compact…
  • Délka: 60 cm
  • Konektor typu A: MIDI Male
  • Konektor typu B: Jack STEREO 3,5 mm Male
  • Zalomení konektoru: Rovný - Lomený

RockBoard RBO CAB F TMB 60 BK 60 cm MIDI kabel

The RockBoard Flat Mini-TRS to MIDI Cable (Type B, 60 cm) is a space-saving adapter cable that links a 3.5 mm stereo TRS MIDI output to a standard 5-pin DIN MIDI input. With its flat rectangular conductor profile, it keeps pedalboard wiring low-profile and resistant to the twisting and kinks that break ordinary round cables over time.

  • Compact straight 5-pin DIN MIDI plug on one end, flat right-angle 3.5 mm TRS stereo plug on the other
  • TRS-MIDI Type B pinout: MIDI 4 (Source) → TRS Tip, MIDI 5 (Sink) → TRS Ring, MIDI 2 (Shield) → TRS Sleeve
  • Flat rectangular cable cross-section prevents cable breakage, torsion and jams under pedals
  • 60 cm / 23 5/8" length suits compact pedalboards and desktop MIDI rigs where every centimetre counts
Další popis ve tvém jazyce ještě není dostupný. Popis v angličtině ti zatím může pomoct.

TRS to MIDI Cable for Compact Pedalboard Setups

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 60 cm / 23 5/8" is a purpose-built adapter cable for routing MIDI between modern compact devices that expose a 3.5 mm TRS MIDI jack and traditional gear with a full-size 5-pin DIN MIDI port. The RockBoard Flat Mini-TRS to MIDI Cable Type B 60 cm is engineered for reliable performance, clean signal transmission, and efficient pedalboard organization. Its ultra-flat connectors and rectangular cable profile are aimed at players who want a tidy, low-clearance signal path without sacrificing the durability expected of a stage-ready MIDI cable.

What Sets This Cable Apart

Two design choices make this cable stand out in the crowded TRS-to-MIDI adapter market. First, the rectangular flat conductor geometry significantly reduces twisting and mechanical stress on the internal cores, helping prevent internal damage and ensuring long-term reliability in frequently reconfigured rigs. Second, the right-angle 3.5 mm TRS plug keeps the connector body almost flush with the pedal or controller chassis, so the cable barely adds any height — a real advantage on shallow boards and tight rack drawers.

Connector Configuration and Signal Path

The connector combination is the single most important spec for any TRS-to-MIDI cable, because the wrong pinout simply will not pass MIDI data. This model uses a straight 5-pin DIN MIDI male on one end and a right-angle 3.5 mm stereo (TRS) male on the other, wired to the TRS-MIDI Type B standard.

  • Connector A: 5-pin DIN MIDI male, straight — fits any standard MIDI In or MIDI Out on traditional synths, controllers and effects units
  • Connector B: 3.5 mm TRS stereo male, right-angle — plugs into the mini MIDI jacks found on compact pedals and desktop controllers
  • Connector Angle: straight-to-angled — the angled TRS end keeps the cable close to the enclosure for a low-profile install
  • Type B Pinout: MIDI 4 (Source) → TRS Tip, MIDI 5 (Sink) → TRS Ring, MIDI 2 (Shield) → TRS Sleeve, MIDI 1 & 3 not connected

Cable Construction and Form Factor

The flat rectangular cross-section is more than a styling choice — it directly affects how the cable survives daily pedalboard use. Round MIDI cables twist under load and eventually fail at the strain relief; a flat profile lays flat against the board, resists torsion, and routes cleanly between pedals.

  • Cable Profile: flat, rectangular cross-section — lays flush against the pedalboard surface and avoids cable jams
  • Length: 60 cm / 23 5/8" — short enough for compact boards, long enough to bridge a controller sitting next to a pedal
  • Colour: black — matches the rest of the RockBoard flat cable family for a uniform rig look

Compatibility and Use Cases

Type B wiring is the standard adopted by several major compact-device manufacturers, so this cable is the correct choice when connecting gear that documents its mini MIDI jack as Type B. It works with devices from Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox, among others. The 60 cm length is ideal for linking a desktop controller or a compact multi-effects unit to a traditional 5-pin MIDI instrument without leaving slack to catch on switches or knobs.

  • Compatible With: universal MIDI devices with 3.5 mm TRS Type B mini MIDI jacks and 5-pin DIN MIDI ports
  • Package Contents: 1 × MIDI cable (60 cm, Type B)
  • Typical Use: connecting compact pedals, desktop synths and grid controllers to traditional MIDI hardware

Určení

Kompatibilní s

Univerzální

Vlastnosti

Barva

Černá

Vstupy a výstupy

Mikrofonní vstup

Ne

Konektory

Konektor typu A

MIDI Male

Konektor typu B

Jack STEREO 3,5 mm Male

Zalomení konektoru

Rovný - Lomený

Balení

Balení obsahuje

MIDI Cable

Rozměry a hmotnost

Délka

60 cm

Země

Země původu

Čína

Dokumenty

Informace o výrobci
Výrobce:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Německo
Odpovědná osoba:
Warwick GmbH & Co Music Equipment KG
Bezpečnostní pokyny

Příslušné bezpečnostní pokyny k výrobku nalezneš v návodu k použití.