Vyber si zemi pro doručení zásilky

Nákupní košík

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI kabel

Kód produktu: 1338163

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI kabel

Kód produktu: 1338163

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under…
  • Délka: 150 cm
  • Konektor typu A: MIDI Male
  • Konektor typu B: Jack STEREO 3,5 mm Male
  • Zalomení konektoru: Rovný - Lomený

RockBoard RBO CAB F TMB 150 BK 150 cm MIDI kabel

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built around a flat rectangular conductor and a straight DIN 5-pin plug paired with an angled 3.5 mm stereo jack, it routes MIDI Type B signals cleanly while staying low-profile under footswitches and pedals.

  • 150 cm length with flat rectangular profile that prevents cable jams and breakage on the pedalboard
  • Straight DIN 5-pin MIDI male to angled 3.5 mm TRS stereo male connector configuration
  • TRS-MIDI Type B pin assignment: MIDI 4 (Source) on tip, MIDI 5 (Sink) on ring, MIDI 2 (Shield) on sleeve
  • Compatible with Novation, 1010Music, Arturia, Malekko, Polyend, Faderfox and similar TRS-MIDI Type B devices
Další popis ve tvém jazyce ještě není dostupný. Popis v angličtině ti zatím může pomoct.

TRS to MIDI Cable for Compact Pedalboard Setups

The RockBoard Flat Mini-TRS to MIDI Cable, TRS-MIDI Type B - 150 cm connects a 3.5 mm TRS-equipped MIDI controller to a standard 5-pin DIN MIDI input or output. Built for pedalboard use, it keeps the MIDI signal path tidy and out of the way of footswitches and patch cables.

Flat Rectangular Conductor and Space-Saving Connectors

Built around a flat, rectangular conductor profile that significantly reduces twisting and mechanical stress, this cable stands out from generic round MIDI cables. The Type B pinout routes MIDI 4 (Source) to the TRS tip, MIDI 5 (Sink) to the TRS ring, and MIDI 2 (Shield) to the TRS sleeve.

Connector Configuration — Straight DIN to Angled TRS

A straight-to-angled geometry lets the MIDI plug sit flush against a controller while the TRS end drops flat against the pedalboard.

  • Connector A: 5-pin DIN MIDI male, straight — standard MIDI hardware input/output
  • Connector B: 3.5 mm TRS stereo male, flat angled — saves vertical space on the pedalboard
  • Connector Angle: Straight to Angled — keeps the cable flush against the board surface

TRS-MIDI Type B Pin Assignment

Type B wiring is the critical functional spec for this cable. Using the wrong type means no MIDI communication. Pins 1 and 3 are intentionally left unconnected.

  • Classification: TRS-MIDI Type B — matches Novation, 1010Music, Arturia, Malekko, Polyend and Faderfox devices

Cable Construction — Flat Profile

Reducing strain on solder joints and preventing the cable from springing back into a coil, the flat rectangular conductor is the key engineering choice here.

  • Length: 150 cm / 59 1/16" — enough reach for medium to large pedalboards
  • Cable Profile: Flat rectangular conductor — prevents twisting, breakage and cable jams
  • Color: Black — blends with standard pedalboard aesthetics

Určení

Kompatibilní s

Univerzální

Vlastnosti

Barva

Černá

Vstupy a výstupy

Mikrofonní vstup

Ne

Konektory

Konektor typu A

MIDI Male

Konektor typu B

Jack STEREO 3,5 mm Male

Zalomení konektoru

Rovný - Lomený

Balení

Balení obsahuje

MIDI Cable

Rozměry a hmotnost

Délka

150 cm

Země

Země původu

Čína

Dokumenty

Informace o výrobci
Výrobce:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Německo
Odpovědná osoba:
Warwick GmbH & Co Music Equipment KG
Bezpečnostní pokyny

Příslušné bezpečnostní pokyny k výrobku nalezneš v návodu k použití.