Features
Channel A
Gain Input level to Channel A
Heat Varies valve gain in upper frequencies adding harmonics and compression
Bass Low shelf +/-12 dB below 680 hZ
Treble High shelf +15 dB Above 680 hZ
Mid .+/-18dB @ frequency selected by Freq control
Freq Selects centre frequency for Mid control (180Hz – 1.8kHz)
Channel B
Gain Input level to Channel B
Bass Low shelf +/-12 dB below 680 hZ
Treble High shelf +15 dB Above 680 hZ
Mid .+/-18dB @ frequency selected by Freq control
Freq Selects centre frequency for Mid control (180Hz – 1.8kHz)
Master
Reverb Controls the level of the on-board digital reverb
Line Volume Controls the output level of the unbalanced mono line output
Main Volume Controls the output level of the balanced XLR outputs
Switches
.+48V On Activates 48V phantom power on Channel B’s XLR input
Phase Inv A Inverts the phase of Channel A
Phase Inv B Inverts the phase of Channel B
Mute Mutes both channels at the FX Loop send (Delay tails and loop pedals will still be audible)
Gnd Lift A Lifts the ground of Channel A’s output XLR
Gnd Lift B Lifts the ground of Channel B’s output XLR
Connections
Input A 1/4″ Jack input to Channel A
Input B 1/4″ Jack and XLR inputs to Channel B (not to be used simultaneously)
Mute Footswitch Allows the mute function to be controlled by a latching footswitch (such as the FS-1)
FX Loop Send A Connects Channel A to the input of an effects unit
FX Loop Return A Connects the output of an effects unit to Channel A output
FX Loop Send B Connects Channel B to the input of an effects unit
FX Loop Return B Connects the output of an effects unit to Channel B output
Line output Mixes both channels for a mono unbalanced 1/4″ output Jack
Main Output A Individual balanced XLR output for Channel A
Main Output B Individual balanced XLR output for Channel B
12V DC 2.1mm DC Jack for connecting the supplied 12VDC centre negative power supply